How to set up MediaStreamer on your Netgear router

ต้องการ VPN สำหรับเราเตอร์ของคุณหรือไม่?

รับ ExpressVPN ตอนนี้

ชื่นชอบ ExpressVPN หรือไม่? ต้องการเดือนฟรีหรือไม่?

แนะนำเพื่อนตอนนี้

This tutorial will show you how to set up MediaStreamer on your Netgear router.

MediaStreamer is a DNS service designed to improve your streaming experience. If your device doesn’t natively support VPN, MediaStreamer is a great alternative for streaming.

To use MediaStreamer smoothly, you must register your IP address on the ExpressVPN website. This allows ExpressVPN to recognize your IP address and grant your device access to MediaStreamer.

Note: MediaStreamer is not a VPN and does not offer the privacy and security benefits of a VPN. You cannot change locations with MediaStreamer.

The following steps were tested on Netgear Nighthawk R7000.

1. Register your IP address on the ExpressVPN website

Go to the ExpressVPN DNS settings page. If prompted, enter your ExpressVPN credentials and click Sign In.

Enter the verification code that is sent to your email.

Under IP address registration, click Register my IP address. If it already reads “registered” next to your IP address, there is no need to select this option again.

Toggle Automatically register my IP address on. This is recommended as it automatically tracks changes to your IP address.

If you have enabled Automatically register your IP address, you can keep your IP address updated by using the ExpressVPN app on your device or signing in to your ExpressVPN account occasionally.

Need help? Click here to contact the ExpressVPN Support Team via Live Chat

Back to top

2. Get your MediaStreamer server IP address

Go to the ExpressVPN setup page. If prompted, enter your ExpressVPN credentials and click Sign In.

Enter the verification code that is sent to your email.

On the right, you will find the MediaStreamer DNS server IP address.

Keep this browser window open. You will need this information for the setup later.

Need help? Click here to contact the ExpressVPN Support Team via Live Chat

Back to top

3. Change the DNS settings on your Netgear router

To access your router admin panel, go to 192.168.1.1 in your web browser. Sign in with your username and password (by default, both are admin).

If your router’s IP address was changed in the past and you cannot remember it, you can find it in your device’s settings.

On the main menu, click Internet.

Under Domain Name Server (DNS) Address, select Use These DNS Servers. For Primary DNS and Secondary DNS, enter the MediaStreamer IP addresses found earlier.

At the top, click Apply.

Your settings will be saved after the update is complete.

Need help? Click here to contact the ExpressVPN Support Team via Live Chat

Back to top